AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather airtecmotorsport AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit Features: Baffled oil catch can Oil level dipstick x2 Pro Hoses silicone hoses Step by step fitting guide Helps reduce carbon build up on intake valves WILL fit with AIRTEC induction shield in place. Only available in Pro-Series Black! Registered Design Right number: AIRTEC Part No: ATMSFO112
airtecmotorsport

AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather

Code: 201166
Add Your Review
AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather
£188.95
In Stock
Category: FORD
AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather

Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves

One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it

Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit

Features:

  • Baffled oil catch can

  • Oil level dipstick

  • x2 Pro Hoses silicone hoses

  • Step by step fitting guide

  • Helps reduce carbon build up on intake valves


WILL fit with AIRTEC induction shield in place.

Only available in Pro-Series Black!

Registered Design Right number:

AIRTEC Part No: ATMSFO112
AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather

Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves

One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it

Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit

Features:

  • Baffled oil catch can

  • Oil level dipstick

  • x2 Pro Hoses silicone hoses

  • Step by step fitting guide

  • Helps reduce carbon build up on intake valves


WILL fit with AIRTEC induction shield in place.

Only available in Pro-Series Black!

Registered Design Right number:

AIRTEC Part No: ATMSFO112