AIRTEC Intercooler Upgrade for Fiat 500 Abarth AIRTEC Intercooler Upgrade for Fiat 500 Abarth airtecmotorsport Replaces very restrictive twin intercooler setup and lengthily pipe-work, for AIRTEC's high flow 60mm core intercooler and shortened alloy pipe kit, we keep fast turbo spool up by using 50mm pipe-work into the turbo and 60mm out of the turbo to help match the throttle body, this combination gives fast turbo spool up and maximum power output Dyno test results - results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1. 120 degree into the intercooler and 22 degree out of the intercooler Run 2. 122 degree into the intercooler and 22 degree out of the intercooler Run 3. 123 degree into the intercooler and 22 degree out of the intercooler Conclusion, the AIRTEC intercooler dropped the intake tempertures by 100 degree on each run and did not suffer from heat soak. Features: 60mm thick proven bar and plate core, specced to AIRTEC design AIRTEC logo'd Cast end tanks for improved Airflow and un-beatable stength Dyno proven, gain BHP Lower intake temps means safer engines 'FACT' Shorter charge pipes than standard twin intercooler set-up, short pipes mean fast turbo spool up Fitting takes 2-3 hours 3 year un-limited mileage warranty Available in Pro-Series satin Black or Natural Silver AIRTEC logo available @ no extra charge Un-beatable value for money Will fit Abarth 500 / 595 models fitted with the IHI turbo - 135, 140, 145 & 160 bhp models Height - 205mm Width - 820mm Thickness - 65mm Registered Design Right number: 6023445  
airtecmotorsport

AIRTEC Intercooler Upgrade for Fiat 500 Abarth

Code: 402914
Add Your Review
AIRTEC Intercooler Upgrade for Fiat 500 Abarth
£519.75
In Stock
Category: 500, FIAT
Replaces very restrictive twin intercooler setup and lengthily pipe-work, for AIRTEC's high flow 60mm core intercooler and shortened alloy pipe kit, we keep fast turbo spool up by using 50mm pipe-work into the turbo and 60mm out of the turbo to help match the throttle body, this combination gives fast turbo spool up and maximum power output

  • Dyno test results - results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC

  • Run 1. 120 degree into the intercooler and 22 degree out of the intercooler

  • Run 2. 122 degree into the intercooler and 22 degree out of the intercooler

  • Run 3. 123 degree into the intercooler and 22 degree out of the intercooler

  • Conclusion, the AIRTEC intercooler dropped the intake tempertures by 100 degree on each run and did not suffer from heat soak.


Features:

  • 60mm thick proven bar and plate core, specced to AIRTEC design

  • AIRTEC logo'd Cast end tanks for improved Airflow and un-beatable stength

  • Dyno proven, gain BHP

  • Lower intake temps means safer engines 'FACT'

  • Shorter charge pipes than standard twin intercooler set-up, short pipes mean fast turbo spool up

  • Fitting takes 2-3 hours

  • 3 year un-limited mileage warranty

  • Available in Pro-Series satin Black or Natural Silver

  • AIRTEC logo available @ no extra charge

  • Un-beatable value for money


Will fit Abarth 500 / 595 models fitted with the IHI turbo - 135, 140, 145 & 160 bhp models

Height - 205mm

Width - 820mm

Thickness - 65mm

Registered Design Right number: 6023445

 
Replaces very restrictive twin intercooler setup and lengthily pipe-work, for AIRTEC's high flow 60mm core intercooler and shortened alloy pipe kit, we keep fast turbo spool up by using 50mm pipe-work into the turbo and 60mm out of the turbo to help match the throttle body, this combination gives fast turbo spool up and maximum power output

  • Dyno test results - results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC

  • Run 1. 120 degree into the intercooler and 22 degree out of the intercooler

  • Run 2. 122 degree into the intercooler and 22 degree out of the intercooler

  • Run 3. 123 degree into the intercooler and 22 degree out of the intercooler

  • Conclusion, the AIRTEC intercooler dropped the intake tempertures by 100 degree on each run and did not suffer from heat soak.


Features:

  • 60mm thick proven bar and plate core, specced to AIRTEC design

  • AIRTEC logo'd Cast end tanks for improved Airflow and un-beatable stength

  • Dyno proven, gain BHP

  • Lower intake temps means safer engines 'FACT'

  • Shorter charge pipes than standard twin intercooler set-up, short pipes mean fast turbo spool up

  • Fitting takes 2-3 hours

  • 3 year un-limited mileage warranty

  • Available in Pro-Series satin Black or Natural Silver

  • AIRTEC logo available @ no extra charge

  • Un-beatable value for money


Will fit Abarth 500 / 595 models fitted with the IHI turbo - 135, 140, 145 & 160 bhp models

Height - 205mm

Width - 820mm

Thickness - 65mm

Registered Design Right number: 6023445